Mounting your system to Hand-railing infrastructure

image

  1. Remove the mounting brackets from the box, being careful to not drop the screws.

image

2. Place U-bolt on the railing, orienting the open portion of the bolt towards you.

image

3. Slip the bracket over the open end of the U-bolt and tighten the bracket in place

image

4. Loosely secure the 2nd bracket, use the sensor box itself as a guide to position of 2nd bracket in the correct spot. Then tighten down the second bracket.

image

5. Screw the box into the bracket as shown above.

image

6. Done.